3. Using the Unit

3.2Using the Memory Function

This unit automatically stores the results up to 25 sets after each measurement.

Note: If the memory is full, the unit will delete the oldest reading.

1. Press the ON/MEM button to turn on the unit.

2. Press the ON/MEM button again.

The memory number appears on the display.

3. Release the ON/MEM button.

The most recent result will appear on the display.

Press the ON/MEM button repeatedly to view the older results.

EN

4. Press and hold the ON/MEM button until “OFF” appears on the display to turn off the unit.

It will automatically turn off after 1 minute.

11

Page 12
Image 12
Omron 9063366-4A instruction manual Using the Memory Function, Release the ON/MEM button