4. Troubleshooting and Maintenance
4.1The Icons and Error Messages
Error Display | Cause | Remedy |
| Device stabilization in process. | Wait until stops flashing. |
Prove cover is not attached correctly. | Attach the probe cover again until | stops |
flashing. |
| |
|
| |
|
|
|
Battery is low. | Replace the battery. |
|
(Refer to section 4.3) |
| |
|
|
Measurement before device stabilization. | Wait until stops flashing. | |
|
| |
The device is showing a rapid ambient | Allow the thermometer to rest in a room for at least | |
30 minutes at room temperature: 10°C and 40°C | ||
temperature change. | ||
(50°F - 104°F). | ||
|
12
