2. Preparation
2.1Removing the Insulating Tape
Pull the insulating tape out from the battery compartment by catching the outer part for the first time.
The unit is turned on and after 1 minute the room temperature will appear on the display.
Notes:
•The room temperature remains on the display even after the unit turns off.
•Place the unit on the table and avoid the direct sunshine or air conditioner flow on for the room temperature.
2.2Switching between °C and °F
This unit is set in °C as default.
1. While the room temperature is displayed, press and hold the START button.
2. While holding it down, press and hold the ON/MEM button until °F appears on the display with 2 beeps.
| Notes: | |
| • | To select the °C mode, start from step1. |
| • | When the unit is switched between °C and °F, all the readings stored in the |
4 |
| memory are deleted. |
|
| |
