Philips DVDR3370H manual Recording without automatic switch, Display

Recording without automatic switch

1Switch on the TV and, if required, select the channel number for the DVD Recorder (channel 3 or 4 or Audio In channel).

2Insert a disc to be used for the recording. The system and content of the disc will be checked. '￿￿￿￿￿￿￿' will appear on the

display.

aIndex display

b A DVD+RW was inserted that already contains recordings. Use

Aand B to select a location where the recording should be started.

a'￿￿￿￿￿￿￿￿￿' appears in the display.

b The inserted DVD is empty.
aA dialog box appears asking if the contents should be erased
or the disc should be ejected.
b The inserted disc is a DVD+RW whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for
recordings until the entire disc is	erased using the
REC/OTR n button.
a'Title limit' appears on the screen when a recording is
attempted.
b A disc can only contain a max. of 48 titles (including the empty titles).		Problem
Erase the titles or change the disc.

3If necessary, switch to TV programming by pressing the MONITOR button on the remote.

4Use CHANNEL q or CHANNEL r to select the channel you want to record. The following will appear on the display:

Channel number of the external inputs:

'￿￿￿￿'	SVHS jack (Y/C) S-VIDEO IN Video jack (CVBS) Video in ,
	Audio jack	IN AUDIO L/R for SVHS-jack and Video jack.
	Switching	between	jack S-VIDEO IN and		Video in is	done
	automatically. In case both jacks are occupied, the signal at jack
	S-VIDEO IN is given priority.
'￿￿￿￿'	Component Video jacks on the back COMPONENT VIDEO
	IN , Audio jacks AUDIO L/R IN for Component Video
'￿￿￿￿'	SVHS-/Audio front jacks S-VIDEO / left AUDIO right
'￿￿￿￿'	Video/Audio front jacks A/V			VIDEO / left AUDIO right
	Switching	between	jack	S-VIDEO and	VIDEO is	done
	automatically. In case both jacks are occupied, the signal at jack
	S-VIDEOis given priority.
'￿￿￿￿'	Digital video (i.Link) front jack DV IN					Tip

￿ ￿￿￿￿￿￿￿￿￿ ￿￿￿

ENGLISH

Recording 67