Philips DVDR3370H manual Automatic TV channel search, AVery few TV channels were found

Automatic TV channel search

During installation, all available TV channels are searched for and saved. If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving, you can start this procedure again. This will replace the TV channels already saved with the new ones.

1Turn on your TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2Turn on the DVD Recorder by pressing STANDBY-ONm .

3Press SYSTEM-MENUon the remote control. The menu bar will appear at the top of the TV screen.

4Select 'A' using D or C .

5Press B continuously to select the line 'Installation'. (It is on the second screen of menus.) Confirm with C .

6Select line 'Auto Ch. Programming' using B or A .

7Press C . The automatic TV channel search starts. This allows the DVD Recorder to save all available TV channels. This

procedure may take several minutes.

8When the channel search is completed, 'Auto ch. search complete' will appear on the TV screen.

9Press SYSTEM-MENUrepeatedly to remove all the menus from the screen.

aVery few TV channels were found

b During 'Automatic channel search' the DVD Recorder detects whether an antenna or a cable TV signal is connected. If you have connected a cable TV signal but found very few TV channels, you must search the channels manually.

1To do so, select 'Cable/Antenna' instead of line 'Auto Ch. Programming' in step 6 and confirm with C .

2If you select 'Cable', channels 1-125 will be available. If you select 'Anten.', channels 2-69 will be available.

Select your type of connection by pressing C repeatedly: 'Anten.', 'Cable' or 'Auto.' automatically detects which one you have.

3Confirm the setting with OK .

4Press SYSTEM-MENUto go to the next menu. Press OK to start channel search as prompted by the on-screen message. When

the channel search is complete, press	SYSTEM-MENU repeatedly	Problem
to remove all the menus.

You can read about how to search for a TV channel manually in the following section 'Adding and clearing TV channels manually'.

Installation

Auto Ch. Programming

Searching for TV channels

000 Channels found

Please wait

24 Installing your DVD recorder