Philips DVDR3370H manual Programming a recording without the VCR Plus+ system

Fit to space Recording

You can select also the recording mode 'FR' .

With these setting the recording mode (bit rate) will be automatically calculated to use the complete empty space (title 'Empty').

If the empty space is too small the recording will be stopped to prevent the following titles from being overwritten.

Do not use this function under the following conditions: •) more then one programmed recording

•) daily/weekly repeated recordingsTip May be the calculation of the recording mode can not function properly.

7If all information is correct, press the OK button. The information is stored in a TIMER block.

8To end, press TIMER s .

9Insert a recordable disc in the Recorder. The disc is checked.

10 Locate on the disc the position where you want to start the recording. Press STOP h .

11 Switch the Recorder off with STANDBY m .

The programmed recording will only function properly when the DVD Recorder has been switched off using the STANDBY m button.

If any of the TIMER blocks are in use, 'TIMER' will light up on the display.

ENGLISH

Programming a recording without the VCR Plus+® system

1Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2With the Recorder on, press TIMER s on the remote control. The programming method selected last is marked.

3Select line 'Timer Programming' using B or A and confirm with C .

The information will be displayed.

4Select the entry field with D or C .

5Enter information with B , A or the number buttons 0..9 .

In the entry field 'Date', you first enter the month and then the date.

Timer

Timer Programming

Rec

Date Ch. Start End Mode

01/22 01 08:30AM 10:00PM M1

Mo-Fr/Weekly	To store
Press SELECT	Press OK

Programming a recording (TIMER) 85