Philips DVDR3370H manual Problem solving for programmed recordings, Recordable disc, Full

Problem solving for programmed recordings

PROBLEM	SOLUTION
DVD Recorder does not	bWhile a programmed recording is being made, you cannot operate your DVD Recorder
respond	manually. If you want to cancel the programmed recording, press STANDBY m .

'Switch off, timer recording' bThe DVD Recorder was switched on a few minutes before the start of a programmed

flashes on the TV screen.	recording.
	Turn off the DVD Recorder by pressing STANDBY m . A programmed recording (timer)
	will only function if the DVD Recorder is switched off (button STANDBY m ).
Error message: 'Insert	bEither no disc was inserted or a disc was inserted that cannot be used for recordings. Insert a
recordable disc'	disc that can be recorded upon.
	Locate on the disc the right position for the recording. Press STOP h .
	Turn off the DVD Recorder by pressing STANDBY m .
The error message 'Disc	bA protected disc was inserted. Undo the erase protection (chapter 'Manual recording', section
locked' appears briefly on	'Preventing accidental erasing of discs '), or insert a different disc.
the screen.
Error message: 'Memory	bIf this error message appears after pressing TIMER s , then all TIMER blocks are already
full'	programmed. No more recordings can be programmed. Press the	C button. Select the
	programmed recording (TIMER block) you want to check or clear using	A or B .
The 'Data error' message	bThe data for the recording could not be transferred. Please check date, start time, and end
appears on the screen.	time of the programmed recording.
The message 'Collision'	bThe timer recording overlaps with another timer recording.
appears on the screen.	bIf you ignore this warning, the programmed recording with the early start time will start first.
	The second recording will then lack the beginning.

bChange the information for one of the two recordings. bDelete one of the two recordings.

88 Programming a recording (TIMER)