Philips DVDR3370H manual Using your DVD remote control with your TV set, AMy TV set will not react

Using your DVD remote control with your TV set

With the enclosed multicode remote control you can control the main functions of your TV set. To do this, you must first enter a code number that corresponds to the make of your TV set. You will find a summary of all available remote control codes on the last page of this manual.

1Hold down the STANDBY m button.

2Using the number buttons 0..9 , enter the code number that corresponds to the make (manufacturer) of your TV set.

When you have entered the code number check that, the TV set

will responds to the TV VOLUME r or TV VOLUME q buttons.

aMy TV set will not react

b Also try to enter the other code numbers or that of other manufacturers.

b In some cases, it is possible that your TV set will not react to the selected code numbers. If this is the case, you unfortunately cannot use this function.

aHow can I reset the remote code?	Problem
b Enter the code number 000

3By using the TV buttons on the panel in the middle of the control, you can:

TV VOLUME q increase the TV volume

TV VOLUME r decrease the TV volume

MUTE y switch off sound

Hold down the button •TV (left side of the remote) and select the corresponding function using the following buttons.

STANDBY m	switch off the TV set
CHANNEL q	next channel number
CHANNEL r	previous channel number
0..9	Number buttons 9..0

ENGLISH

User preferences 95