5

Press STANDBY-ONm on the recorder. '￿￿ ￿￿ ￿￿￿' will

appear on the display.

6Switch on your TV and select the channel used for DVD/VCR playback on your TV. Choose between channel 3 or 4.

How do I switch the Recorder between channel 3 and 4?

The factory setting is for channel 3. However, if you would like to switch to channel 4, proceed as follows:

1Hold 4 on the remote control while '￿￿ ￿￿ ￿￿￿' is displayed.

2 '￿￿￿' (channel 4) will appear on the display.

3 If you want to switch back to channel 3, hold 3 . '￿￿￿' (channel 3)

will appear on the display.

?

7Switch your TV to the selected channel (channel 3 or 4). Use therefor your TV remote control.

The menu for language selection will appear on the screen.

aI don't see a menu for language selection

 

b Check the cable connections.

 

b Is 'DVDR' (DVD Recorder operation) lit up in the display?

 

If not, press the TV/DVD button until 'DVDR' is lit.

Problem

b Change between channel 3 and 4 on the TV.

8This TV channel number must be used in the future for DVD recorder playback.

Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.

ENGLISH

Initial Setup

Menu Language

English

Español

Français

Press OK to continue

Connecting the DVD Recorder

17

 

Page 29
Image 29
Philips DVDR3370H manual Problem, How do I switch the Recorder between channel 3 and 4?