Philips DVDR3370H Please note the color order, Switching TV and DVD Recorder to Progressive scan

4If your TV set is equipped with a 'progressive scan' jack, please use this jack. (Usually called 'Video In Y Cb Cr'. Please see your

TV's instruction manual).

Please note the color order
The colors of the jacks on the DVD Recorder must match those on the
TV (red-red/blue-blue/green-green). If they are not matched properly,
this could cause the color of the picture to be reversed or there could	Tip
be no picture at all.

5Use an audio cable and plug one end into the AUDIO L/R OUT jack at the back of the DVD Recorder (next to COMPONENT VIDEO OUT ) and the other into the red/white

Audio In jacks of the TV (usually called Audio in', 'AV in'. Please see your TV's instruction manual).

6Switch on the TV.

If necessary, set the TV to the Component Video input jacks or select the corresponding channel number. For the channel number, please see your TV's instruction manual.

7Connect the mains jack 4MAINS at the back of the DVD Recorder with the power supply using the supplied power cable.

The most important features of the DVD Recorder will appear on the display.

After the initial installation is completed, this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'Standby'.

8	Press STANDBY-ONm on the recorder. '￿￿ ￿￿ ￿￿￿' will
	appear on the display.
	Switching TV and DVD Recorder to 'Progressive scan'
	The factory settings of the DVD Recorder are set to 'Interlaced'. If you
	selected the 'Progressive scan' connection during installation, you must
	switch the 'Component Video output' of the DVD Recorder and, if
	necessary, the 'Component Video input' of the TV to 'Progressive scan.'
	Switching the TV
	Please select 'Progressive scan' for the Component Video input on the
	TV. If necessary, see your TV instruction manual.
	If your TV is equipped with separate input jacks for Interlaced and
	Progressive, connect the DVD Recorder to the jack that supports
	'Progressive scan.'

Switching the DVD Recorder

1Disconnect the recorder's power cord.

2Hold down N on the DVD Recorder while reconnecting the power cord. 'PRO' (progressive scan) will appear on the display.

3If you want to switch back, repeat steps 1 and 2 . 'PRO'

(progressive scan) will	disappear from the display. The DVD	Tip
Recorder is switched to	'Interlaced.'

Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.

ENGLISH

Connecting the DVD Recorder 13