Canon EOS Elan 7NE Body Only manual 11Set the Eye Control switch to g

9While looking at the blinking AF point, press the shutter button.

5• Follow steps 4 to 6.

		sThe AF point will blink in the following
8	7	sequence: 5 → 6 → 7 → 8.

6

10Check the viewfinder display. sWhen the calibration is completed,

the CAL No. will stop blinking and “i” will be displayed.

11Set the Eye Control switch to <g>.

• This completes the calibration procedure, and you can now use Eye Control (p.48) to take pictures.

If the camera does not detect your eye movement properly during the calibration, the beeper will sound and the CAL No. will blink on the LCD panel. In such a case, press the shutter button and start from step 3.

• If you do the calibration procedure only for the horizontal orientation, Eye Control during vertical picture-taking might not be so accurate. Be sure to also complete the calibration procedure for the vertical orientation.

•If you interrupt the calibration procedure, wait until the AF point in the viewfinder stops blinking, then start over from step 3.

•If the calibration does not go well, see “Eye Control Calibration Operation Tips” (p.46).

•If the beeper setting (p.74) is set to “W”, the beeper will not sound.

45