Canon EOS Elan 7NE Body Only manual Checking the Film Speed, Move the 7 arrow to the D icon

• The shutter curtains have been manufactured with very high precision. Never touch them with your fingers. When loading film, do not touch or damage the curtains with your fingers or film.

•In hot and humid environments, do not remove the film packaging until you are ready to load the film.

•Infrared film cannot be used with this camera.

If the film is not loaded properly, the <5> icon will blink on the LCD panel and the shutter will not work. Reload the film properly.

Checking the Film Speed

The camera reads the film cartridge’s DX code and sets the film speed automatically within ISO 25 - 5000.

• Set the Mode Dial to a Creative Zone mode.

Move the <7> arrow to the <D> icon.

• Look at the LCD panel and press the <0> button to move the arrow. (1)

sThe current film speed is displayed.

If you want to set a film speed different from the DX-coded film speed or if the film cartridge is not DX-coded, see “Setting the ISO Film Speed” on page 73.

C.Fn-03-1 can prevent the film speed from being set automatically with the DX code. (p.85)

23