Canon EOS Elan 7NE Body Only Mirror Lockup, SAfter 30 seconds, it will go back down automatically

Mirror Lockup★

Mirror lockup is enabled with C.Fn-05-1. This prevents mirror-caused vibrations which may blur the image during close-ups or when a telephoto lens is used. To set this Custom Function, see “Setting a Custom Function” on page 84. When mirror lockup is set, the camera operates as follows.

1 Press the shutter button fully. sThe mirror will lock up.

sAfter 30 seconds, it will go back down automatically.

2Pressagain. the shutter button fully

sThe picture will be taken and the mirror will go back down.

•To take another shot with mirror lockup, start from step 1 again.

• If you are shooting a very bright scene such as the beach or ski slope with mirror lockup, take the picture promptly after the mirror goes up.

•During mirror lockup, do not point the lens toward the sun. Doing so may damage the shutter curtains due to the sun’s heat.

•If you use mirror lockup with the self-timer for a bulb exposure, keep pressing the shutter button completely (10-sec. self-timer + bulb exposure). If you let go of the shutter button during the self-timer, there will be a shutter-release sound. It is not the shutter release.

• For mirror lockup, using the Remote Switch RS-60E3 or Remote Controller RC-1/RC-5 (both sold separately) is recommended.

•During mirror lockup, the film advance mode will be Single even if it is set to <H>.

•If mirror lockup is used with the self-timer, pressing the shutter button fully will lock up the mirror first and the picture will be taken 10 sec. later.

75