Canon EOS Elan 7NE Body Only manual Replacing the Date Battery

Select the date or time display.

Imprinting the Date or Time (DATE Model only)

Setting the Date and Time

1 • Press the <q> button.

2Select the digit to be set.

•Press the <6> button until the

digit blinks.

sEach time you press the button, the settable digit will change as follows: Year → month → day. Or hour → minute →“a”

3 Set the correct number.

•Keep pressing the <7> button until

the correct number appears.

• Repeat steps 2 and 3 until all the date and time digits are set correctly.

4Finalize the setting.

•Keep pressing the <6> button

until no digits blink.

• If “a” is blinking and you press <6>, the seconds will be reset to 0.

Replacing the Date Battery

When the date/time on the imprinted photograph looks faded, replace the CR2025 lithium battery as follows. Battery life is about 3 years.

1 Remove the battery chamber cover.

•Open the camera back and loosen

the screw as shown in the illustration.

2Take out the battery.

3 Insert a new battery.

•The battery’s positive contact (+) must face up.

4Reattach the battery chamber cover.

• Set the correct date and time.

36