Canon EOS Elan 7NE Body Only manual Press the shutter button halfway, 6Take the picture

5 Press the shutter button halfway.

•While looking at the AF point where you want the exposure to be set, press the shutter button halfway.

sThe optimum point of focus, aperture, and shutter speed to obtain the desired depth of field are set automatically.

•When you let go of the shutter button, the display will change to “r”.

•The exposure setting is set when the picture is taken.

6Take the picture.

•If the aperture value display does not blink, the desired depth of field will be obtained.

•A correct exposure will be obtained as long as the shutter speed and aperture displays do not blink.

•If the aperture display blinks, it means that the desired depth of field cannot be obtained. Move further away from the subject or use the wide-angle end if you are using a zoom lens. Then try it again.

•If the “K” shutter speed and maximum aperture display blink, it means the subject is too dark. The <Q> mode cannot be used.

•If the “D” shutter speed and minimum aperture display blink, it means the subject is too bright. Attach an ND filter (sold separately) to reduce the light entering the lens.

65