Canon EOS Elan 7NE Body Only Checking the Battery Level, Turn the Mode Dial to a shooting mode

Checking the Battery Level

Check the battery level after replacing the batteries and before using the camera.

Turn the Mode Dial to a shooting mode.

• Hold down the dial’s lock release button while turning the dial.

sThe camera will then turn on and the LCD panel will display one of the following battery level mark:

			: Battery level OK.
			: The battery level is low. Keep
			spare batteries handy.
			: The batteries will soon be
			completely exhausted.
			: Replace the batteries.
Battery Life				(With 24-ex. rolls)
Temperature	0% Flash Use		50% Flash Use	100% Flash Use
At 20˚C	125 (115) rolls		38 (33) rolls	19 (17) rolls
At –20˚C		70 (65) rolls	20 (19) rolls	10 (9) rolls

•The battery life shown above is based on Canon’s testing conditions with new batteries.

•Figures in parentheses apply when the Eye Control switch is <1>.

• If nothing is displayed on the LCD panel, the batteries may have been installed incorrectly. Take out the batteries and install correctly.

•If you often press the shutter button halfway for a prolonged period or just autofocus without taking a picture, the battery life will be affected.

•When not using the camera, set the Mode Dial to <2>.

19