Canon EOS Elan 7NE Body Only manual Canceling AEB, S R E Q modes

Canceling AEB

•After the three bracketed shots are

taken, the AEB setting will not be canceled automatically. To cancel AEB, follow steps 1 and 2 to set the AEB amount to “Z”.

•AEB will also be canceled automatically if the flash is ready to fire.

AEB cannot be used with flash or bulb exposures.

• During AEB shooting, the <7> arrow will appear next to the <L> icon and the AEB level <x> will be displayed. In the viewfinder, the <j> icon will blink.

•In the <H> film advance mode, the camera stops shooting automatically after taking the three AEB shots. In the <J> (single frame) mode, press the shutter button completely three times to take the three AEB shots.

•If you use the self-timer or remote control, the three AEB shots will be taken continuously automatically.

•If C.Fn-05-1 is set (mirror lockup), single-frame film advance will take effect during AEB shooting even if the continuous film advance mode has been set.

•AEB can also be set in combination with exposure compensation. If you set the exposure compensation amount beyond the displayable range, the indicator will look as shown below. However, the exposure compensation amount will still take effect.

In the <S> <R> <E> <Q> modes:

: ±1 stop AEB.

: ±1 stop AEB with –1-stop exposure compensation.

: ±1 stop AEB with –1.5-stop exposure compensation.

: ±1 stop AEB with –2-stop exposure compensation.

In the <W> mode:

: ±1 stop AEB with –2-stop exposure compensation.

: ±1 stop AEB with over –2-stop exposure compensation.

69