Fax does not answer/Redial pending
1 Allow the product to retry sending the fax.
1
2 Call the recipient to ensure that the fax machine is on and ready.
3 Check that you are dialing the correct fax number.
4 Check that the Redial on no answer option is enabled.
5 Unplug the product telephone cord from the wall, plug in a telephone, and try making a call.
6 Plug the product phone cord into a jack for another phone line.
7 If the error persists, replace the LIU.
Fax memory error # (number
1Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord.
2If you set up faxes to be sent at a future time or to be polled, print a fax log to identify which faxes might have been lost. Then, reenter the faxes.
3Faxes that were received to memory (instead of printing) have been lost. Ask the sender to resend the fax.
4If the error persists, replace the formatter.
Fax memory full/Canceling receive
The product memory filled. Pages that fit into memory will be printed.
1Print all of the faxes, and then have the sender resend the fax.
2Cancel all fax jobs or clear the faxes from memory.
Fax memory full/Canceling send
The product memory filled. Pages that fit into memory were sent.
1Print all received faxes, or wait until all pending faxes are sent.
2Cancel all fax jobs, or clear the faxes from memory.
EN | Alphabetical messages 43 |