Setting the page count
The page count is stored in the printer’s NVRAM. If it is necessary to replace the formatter PCB, the page count should be reset to the printer’s original page count to reflect the age of the print engine. Before removing the old formatter PCB, print a
PJL command | Description |
|
|
Start PJL job | |
|
|
@PJL SET SERVICEMODE | Enter Service mode |
=HPBOISEID |
|
|
|
@PJL SET PAGES=0 | Set page count [= xxxxx] |
|
|
@PJL SET SERVICEMODE=EXIT | Exit Service mode |
|
|
@PJL RESET | Perform PJL reset |
|
|
Exit PJL mode | |
|
|
ECZ | Print |
|
|
ECE | Reset the printer |
|
|
94 Chapter 2 – Service mode | EN |