Softswitches

Any time the RFI shield is removed from the printer, or when softswitches are reset to defaults, the country code softswitch must be reset.

Extended Service mode allows you to change softswitches on the printer. A softswitch is a set of one to eight bits (a sequence of eight 1’s and 0’s), as needed. See the software technical reference for a complete list of softswitches.

2

To change the country code softswitch

1Press BACKSPACE#** to gain access to the Extended Service menu.

2Press < or > until MEMORY/SOFTSWITCHES appears below SERVICE on the control panel.

3Press ENTER/MENU.

4If SOFTSWITCHES does not appear below MEMORY/SOFTSWITCHES on the control panel, press < or > until it appears.

5Press ENTER/MENU.

6Use the keypad to enter 101 (the “country code” softswitch).

7Press ENTER/MENU.

8Use the keypad to enter the sequence that corresponds to the country in which the product is used. (See the list of country code softswitch sequences on the following page.)

EN

LJ 3100/3150 Service mode functions 105