![](/images/backgrounds/286708/hp-lj-1100-users-manual-549199249x1.png)
Blank pages
• Your software program is sending an extra
– Check the software’s printing configuration information.
• The printer might be feeding two or more pages at once because the media is difficult to separate.
• The sealing tape has been left in the toner cartridge.
• The toner cartridge is empty or defective.
• The laser/scanner door does not open properly.
– Remove and reseat the toner cartridge.
– Check the laser/scanner shutter door for proper operation.
• The toner cartridge guide is damaged, improperly positioned, or missing.
• There is no transfer roller voltage.
9
– Perform the Half
– Replace the transfer roller if necessary.
– Check the ECU.
• Discontinuity exists in the
• There is no developing bias.
– Clean the
– Replace the ECU.
• There is no drum ground path.
– Check the drum ground.
– Replace the ECU.
• The laser/scanner cable assembly is defective.
• The page length and margins are not set correctly for the media size.
EN | Image defect details 247 |