Documents were lost, START to continue
1Press START. A report is printed.
2Check the fax log status column for the “Fax Document was Lost” message.
3Resend the associated outgoing faxes. Ask the sender to resend incoming faxes.
Duplex error, check duplexer
1Check the duplexer for a jam.
2Make sure the
3Reseat the duplex assembly, and check the connection.
4Replace the duplex unit.
EIO [x] not functional
1Reseat the EIO disk in the indicated slot [x].
2If the problem persists, remove and replace the EIO disk.
EIO [x] initializing alternates with
Do not power off
1Wait for the message to disappear (up to 5 minutes). If the printer EIO card is operating correctly and communicating with the network, this message disappears after approximately 1minute and no action is required.
2If the EIO card is unable to communicate with the network, this message remains for 5 minutes and then disappears.
•Reseat or replace the indicated EIO card [x].
•Check the cable connections.
3If the problem persists, contact the network administrator.
40 Chapter 1 – | EN |