Printer signal error

The printer door is not latched securely.

1Open and close the printer door.

2Unplug the power cord from the power source, wait 10 seconds, and then reconnect the power cord.

3If the problem persists, replace the laser/scanner assembly.

Printer tray mispick/ENTER to resume

The print engine has failed to pick up a piece of media.

1Reload the media in the paper-input tray.

2Press ENTER/MENU to continue the job.

Processing job

The printer is processing a job.

Wait for the job to finish. This can take several minutes for a complex job.

Processing cleaning page

The printer is conducting the manual cleaning-page process. Wait for the job to finish. This can take up to 2.5 minutes.

RAM disk device failure

1Turn the printer off and on to clear the message.

2If the message persists, install a new RAM disk.

58 Chapter 1 – Control-panel messages

EN