66.xx.yy [type] Failure alternates with Check cables and cycle power
First X = Device number in chain | 1 |
Second X = Device type (3 types):
1 = Input
2 = Output
3 = Stapler/stacker unit
yy =
1Press GO to clear the message.
2Turn the printer off and then on.
3Check and reseat all cables between the printer and the specified device.
4Reseat the external
68 NVRAM full check settings
1Print a configuration page and check the printer settings to determine which values have changed.
2Hold down CANCEL JOB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used.
68.x Permanent storage error alternates with Check settings
An error occurred in the printer permanent storage, and one or more printer settings has been reset to its factory default.
Print a configuration page, and then check the printer settings to determine which values have changed.
EN | Numerical messages 81 |