LJ 2200 series
Note
This process requires use of a transparency to remove dust and toner from the print paper path. If transparency film is unavailable, you can use
1Make sure the printer is turned on and in the Ready state. Load a transparency in tray 1.
2Press Go and hold for 10 seconds.
3Release Go, the lights will cycle from front to back until the cleaning process has completed.
Note
During the engine cleaning process, the printer pulls the transparency into the printer and then stops. This is not a jam. The transparency will be slowly stepped through the printer to complete the engine cleaning.
4Discard the blank page produced from the engine cleaning process.
238 Chapter 9 – Image quality | EN |