80 Service (####)

81 Service (####)

1Disconnect the power cable from the product, wait at least 30 seconds, reconnect the power cable, and then wait for the product to initialize.

2If the error persists, replace the formatter.

8x.yyyy EIO [z] error

The EIO accessory in slot [z] has encountered a critical error.

Z = Description

1 = EIO slot 1 -The printer detected an error with the EIO accessory.

2 = EIO slot 2 -The printer detected an error with the EIO accessory.

6 = EIO slot 1 -The EIO accessory detected an error.

7 = EIO slot 2 -The EIO accessory detected an error.

1Turn the printer off, and then turn the printer on.

2Turn the printer off, reseat the EIO accessory in slot [z], and then turn the printer on.

3Turn the printer off, remove the EIO accessory from slot [z], install it in a different EIO slot, and then turn the printer on.

4Replace the EIO accessory in slot [z].

84 Chapter 1 – Control-panel messages

EN