Wasp Bar Code WPS100 manual Scanning Sequence Examples, Errors While Scanning, High Frequency

Wasp WPS100 Product Reference Guide

If you are not using a USB cable, you must select a host type (see each host chapter for specific host information). After you hear the power-up beeps, select a host type. This only needs to be done once, upon the first power-up when connected to a new host.

To return all features to their default values, all you need to do is scan the Set All Defaults bar code on page 4-5.Throughout the programming bar code menus, default values are indicated with asterisks (*).

* Indicates Default *High Frequency Feature/Option

Scanning Sequence Examples

In most cases you need only scan one bar code to set a specific parameter value. For example, if you want to set the beeper tone to high, simply scan the High Frequency (beeper tone) bar code listed under Beeper Tone on page 4-6.The scanner issues a short high beep and the LED turns green, signifying a successful parameter entry.

Other parameters, such as specifying Serial Response Time-Out or setting Data Transmission Formats, require that you scan several bar codes. Refer to Host Serial Response Time-outon page 6-20and Scan Data Options on page 8-9for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if you make an error during a scanning sequence, just re-scan the correct parameter.

4-2