UPC/EAN Supplemental Redundancy

Symbologies

With Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times a symbol without supplementals is decoded before transmission. The range is from two to thirty times. Five or above is recommended when decoding a mix of UPC/EAN symbols with and without supplementals, and the autodiscriminate option is selected. The default is set at 20.

Scan the bar code below to set a decode redundancy value. Next, scan two numeric bar codes beginning on page D-1in Appendix D. Single digit numbers must have a leading zero. If you make an error, or wish to change your selection, scan Cancel on page D-5.