Wasp Bar Code WPS100 manual User Preferences Default Parameters, User Preferences Default Table

User Preferences

User Preferences Default Parameters

Table 4-1lists the defaults for user preferences parameters. If you wish to change any option, scan the appropriate bar code(s) provided in the User Preferences section beginning on page 4-5.

Note: See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and miscellaneous default parameters.

Table 4-1. User Preferences Default Table

		Page
Parameter	Default	Number
User Preferences
Set Default Parameter	All Defaults	4-5
Beeper Tone	High	4-6
Beeper Volume	High	4-7
Volume Change Trigger Delay	5.0 Sec	4-8
Laser On Time	3.0 Sec	4-9
Beep After Good Decode	Enable	4-10
Low Power Blink	Blink	4-11
Scan Pattern Mode	Rastering	4-12
Single-Line Aim Duration	2 sec	4-13
Time-out Between Same Symbol	0.6 sec	4-15
Time-out Between Different Symbols	0.2 sec	4-15
Time Delay to Low Power Mode	30 Minutes	4-16

4-3