Wasp Bar Code WPS100 manual Transmit Buffer

Symbologies

Note: The Clear Buffer contains only the dash (minus) character. In order to scan this command, be sure Code 39 length is set to include length 1.

Transmit Buffer

There are two methods to transmit the Code 39 buffer.

1.Scan the Transmit Buffer bar code below. Only a start character, a plus (+), and a stop character.

•The scanner transmits and clears the buffer.

•The scanner issues a lo/hi beep.

Transmit Buffer

2.Scan a Code 39 bar code with a leading character other than a space.

•The scanner issues a hi/lo beep to indicate a good decode and that buffering of the decode data has occurred.

•The scanner transmits and clears the buffer.

•The scanner signals that the buffer was transmitted with a lo/hi beep.

Note: The Transmit Buffer contains only a plus (+) character. In order to scan this command, be sure Code 39 length is set to include length 1.

7-41