Wasp Bar Code WPS100 manual Do Not Buffer Code, Clear Buffer

Wasp WPS100 Product Reference Guide

Code 39 Buffering (Scan & Store)(Continued)

*Do Not Buffer Code 39

While there is data in the transmission buffer, selecting Do Not Buffer Code 39 is not allowed. The buffer holds 200 bytes of information.

To disable Code 39 buffering when there is data in the transmission buffer, first force the buffer transmission (see Transmit Buffer on page 7-41)or clear the buffer.

Buffer Data

To buffer data, Code 39 buffering must be enabled and a Code 39 symbol must be read with a space immediately following the start pattern.

•Unless the data overflows the transmission buffer, the scanner issues a lo/hi beep to indicate successful decode and buffering. (For overflow conditions, see Overfilling Transmission Buffer.)

•The scanner adds the decoded data excluding the leading space to the transmission buffer.

•No transmission occurs.

Clear Transmission Buffer

To clear the transmission buffer, scan the Clear Buffer bar code below, which contains only a start character, a dash (minus), and a stop character.

•The scanner issues a short hi/lo/hi beep.

•The scanner erases the transmission buffer.

•No transmission occurs.

Clear Buffer

7-40