Wasp Bar Code WPS100 manual Chapter User Preferences

Chapter 4

User Preferences

Introduction

You have the option to program the WPS100 scanner to perform various functions, or activate different features. This chapter describes each user preference feature and provides the programming bar codes necessary for selecting these features for your WPS100 scanner. Before programming, follow the instructions in Chapter 1, Getting Started.

Your WPS100 is shipped with the settings shown in the User Preferences Default Table on page 4-3(also see Appendix A, Standard Default Parameters for all host device and miscellaneous scanner defaults). If the default values suit your requirements, programming may not be necessary.

Features values are set by scanning single bar codes or short bar code sequences. The settings are stored in non-volatile memory and are preserved even when the scanner is powered down.

4-1