Connecting a Keyboard Wedge Interface

Male DIN Keyboard

Y-cable

Power supply (if needed)

Figure 5-1. Keyboard Wedge Connection with Y-cable

To connect the Keyboard Wedge Y-cable:

1.Switch off the host and unplug the keyboard connector.

2.Attach the modular connector of the Y-cable to the cable interface port on the scanner. (See Installing the Interface Cable on page 1-3.)

3.Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.

4.Connect the round female DIN keyboard connector of the Y-cable to the keyboard.

5.If needed, attach the optional power supply to the connector in the middle of the Y- cable.

6.Ensure that all connections are secure.

7.Switch on your host system.

8.Scan the appropriate bar codes in this chapter to configure the scanner.

5-2