Wasp Bar Code WPS100 manual Standard Default Parameters

Standard Default Parameters

Table A-1. Standard Default Parameters Table (Continued)

		Page
Parameter	Default	Number
Check Receive Errors	Enable	6-13
Hardware Handshaking	None	6-14
Software Handshaking	None	6-17
Host Serial Response Time-out	2 Sec	6-20
RTS Line State	Low RTS	6-22
Stop Bit Select	1	6-23
Data Bits	8-Bit	6-24
Beep on <BEL>	Disable	6-25
Intercharacter Delay	0 msec	6-26
Nixdorf Beep/LED Options	Normal Operation	6-28
Ignore Unknown Characters	Send Bar Codes	6-29
USB Host Parameters
USB Device Type	HID (Human Interface	6-5
	Device) Keyboard
	Emulation
USB Country Keyboard Types (Country Codes)	North American	6-6
USB Keystroke Delay	No Delay	6-10
USB CAPS Lock Override	Disable	6-11
USB Ignore Enable Transmission	Enable	6-11
Emulate Keypad	Disable	6-13

1User selection is required to configure this interface and this is the most common selection.

A-3