Wasp Bar Code WPS100 manual Scanning in Omni Mode

Scanning

Scanning in Omni Mode

In this mode, an omni scan pattern provides rapid, orientation-free scanning. This scan pattern is used with either hands-free or hand-held scanning..

To scan a bar code, direct it in toward the window of the scanner (“presentation” scanning, see Figure 2-7 on page 2-6) or from side to side in a sweeping motion (“swipe” scanning, see Figure 2-8 on page 2-6).

1.Ensure all cable connections are secure.

2.Insert the scanner in the optional hands-free stand by placing the front of the scanner into the stand’s “cradle” (see Figure 2-3) or place the scanner on a flat surface (see Figure 2-4).

3.To scan a bar code, present the bar code and ensure the scan lines cross every bar and space of the symbol. The scan pattern becomes steady when the scanner detects the bar code. See Figure 2-5 on page 2-5for scanning in hands-free mode and Figure 2-6 on page 2-5for scanning in hand-held mode.

4.Upon successful decode, the scanner beeps and the green LED flashes momentarily.

2-3