Wasp Bar Code WPS100 manual USB Interface

USB Interface

2.Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of the IBM SurePOS terminal.

3.Select the USB device type. See USB Device Type on page 6-5.

4.On first installation when using Windows, the software prompts you to select or install the "Human Interface Device" driver. To install the "Human Interface Device" driver provided by Windows click "Next" through all the choices and click "Finished" on the last choice. The scanner powers up during this installation.

5.If you are not using a North American keyboard, scan the appropriate country bar code under USB Country Keyboard Types (Country Codes) on page 6-6.

If you are having any problems with your system, see Troubleshooting on page 3-2.

6-3