![](/images/backgrounds/286708/hp-lj-1100-users-manual-54919965x1.png)
Tray [x] load [type] [size]
This message occurs if tray 2, 3, or 4 was requested, but the tray is
empty or the tray adjustments are not set for the requested media type 1 or size.
1Ensure that all three
2Make sure that the media type is set in the control panel.
3Load the requested media into an indicated tray. Ensure that the tray is fully seated.
4If you are trying to print on A4- or
5Press GO to print from the next available tray.
6Press
7Press SELECT to accept the alternate type or size.
Tray 1 load [type] [size]
1Load the requested media into the specified tray. Ensure that the trays are correctly adjusted for size, and that the tray type settings (and size for tray 1) are set from the
2If you are trying to print A4- or
3If the message appears, and the correct media is loaded:
•Ensure that all
•Ensure the tray type setting is correct in the
•Check the size tabs on the right side of the tray.
•Check the size switches and paper sensors.
•Ensure that the tray is fully seated.
EN | Alphabetical messages 63 |