LJ 1200 series

Note

This process requires use of a transparency to remove dust and toner from the print paper path. If transparency film is unavailable, you can use copier-grade paper. If you must use paper, perform the procedure two or three times to ensure proper cleaning.

1Load a transparency in the priority input tray.

2Make sure that the printer is in the Ready state.

3Press and hold the Go button for 10 seconds. The transparency feeds through the printer slowly. Discard the transparency.

Note

After you press and hold the Go button, the three printer lights blink

 

until the cleaning process is complete.

9

 

EN

Cleaning page 237