Transparency specifications
Transparency specifications
Category | Specifications |
|
|
Caliper | 0.100 to 0.110 mm (3.9 to 4.3 mils) |
|
|
Cutting angle | 90° ± 0.2° |
|
|
Finishing precision | Cut sheet to within 0.8 mm (0.03 in) of nominal |
| and ± 0.2° of square. |
|
|
Fusing | Overhead transparency material must be |
compatibility | compatible with the heat and pressure of the |
| fusing process. Materials must not discolor, melt, |
| offset material, or release hazardous emissions |
| when heated to 175° to 230° C (347° to 446° F) |
| for 0.1 second. |
|
|
Preventing jams caused by transparencies
Use these preventive measures to avoid printer malfunctions caused by transparencies:
•Use the straightest paper path to avoid curling and other problems.
•Use transparencies with the correct resistivity.
•Use transparencies that meet HP specifications for fusing compatibility.
•Remove each printed sheet from the tray and place it on a flat
surface before printing the next sheet. | 5 |
•Print transparencies to the rear output bin to avoid jams (LJ 2200).
EN | Transparency specifications 163 |