Cold reset paper

The cold-reset paper size is stored in NVRAM. When a printer cold reset is performed, the default paper size (in the Printing menu) is set to the value saved for the cold-reset paper size. Possible values are COLD RESET PAPER=LETTER and COLD RESET PAPER=A4. When replacing the formatter in countries that use A4 rather than letter-size paper, set the cold-reset paper size to A4.

Diagnostics

The Diagnostics menu item enables or disables the use of the firmware diagnostic features for software development. Possible values are DIAGNOSTICS=OFF* and DIAGNOSTICS=ON. To gain access to the diagnostic features, verify that the printer is in the Ready state, and press SELECT.

Clear event log

Select this item to clear the internal event log.

Top margin

This item can be used to adjust the margin between the top of the page and the top of the printed image.

Note

Adjust the top margin value in the software program first. This top margin value does not affect the engine-test top margin.

Before adjusting the top margin through the Service menu, first ensure that the engine-test top margin register is properly adjusted.

To set the top margin registration value:

1Press ITEM to scroll through the Service menu until

TOP MARGIN=07 appears.

2Press VALUE to increase or decrease the margin.

3Press SELECT to save the new margin adjustment.

124 Chapter 2 – Service mode

EN