LJ 3100 and 3150 series

1Place a stack of plain letter- or A4-sized paper into the paper-input bin. (Do not use thick or rough paper.)

2For Microsoft Windows 95 or Windows 98, open Windows Explorer.

OR

For Windows 3.1x, open File Manager.

3Open the JetSuite folder (if the JetSuite Pro software was installed to the default location, the path is “C:\JetSuite”).

Note

If you do not have access to JetSuite Pro software, a cleaning page is available from the HP web addresses: http://www.hp.com/support/lj3100

OR

http://www.hp.com/support/lj3150

9

 

4Double-click CleanPg.jsd to open the cleaning page.

5When the document opens in the JetSuite Pro software, click Print in the link icon bar at the bottom of the dialog.

6After the cleaning page has printed, remove the stack of paper from the paper-input bin.

7Place the cleaning page into the paper-input bin, top first, face down.

8Print a different file.

9Inspect the page. If there are no shiny, black spots on the page’s black strip, the print path is clean. Discard the page, and the procedure has been completed.

10If there are shiny, black spots on the black strip of the page, toner has been cleaned from the print path. Discard the page. Repeat steps 1 through 9 until there are no shiny, black spots on the page.

EN

Cleaning page 239