58.2Printer error alternates with
Cycle power to continue
1 Turn the printer off, and then turn the printer on. | 1 |
2Verify that the environmental thermistor cable is securely connected.
3Replace the environmental thermistor.
4If the error persists, replace the ECU.
58.3Printer error
1Replace the toner cartridge.
2Check the connection from the memory controller PCB to the engine controller.
3Replace the memory controller PCB.
4Replace the cartridge memory antenna assembly.
59.x Printer error alternates with Cycle power to continue
X = Description
0 = Motor error
1 = Motor startup error
2 = Motor rotation error
1Turn the printer off and then on.
2Make sure that the fuser or toner cartridge is not hindering gear movement in the drive train.
3Verify that the cable in the main motor is seated properly.
4If the error persists, replace the motor
EN | Numerical messages 79 |