Checking paper path

The engine is checking for possible jams or print media that was not

1

cleared from the printer.

Wait for the printer to finish checking (up to 30 seconds).

Clear document from scanner

1Check to see if the document is jammed or if multiple sheets of the document were loaded.

2Check the special-media lever. It should be to the left for regular- weight items or to the right for thick items. Thick items must be fed one at a time.

3Check the control panel configuration for outgoing faxes, including the “send long pages” setting.

Close top cover

1Close the top cover.

2If the message persists, check SW101 for proper operation. Make sure the wires are connected properly.

3Replace SW101.

4If the new switch does not solve the error, the wiring or the ECU might be defective.

Communication error

1Try resending the fax.

2If the call fails again, check that the telephone cord is securely connected. Then check for a dial tone on the phone line by pressing

MANUAL DIAL.

3Reset the product by pressing and holding STOP/CLEAR for seven seconds.

4Wait, or try resending the fax later.

EN

Alphabetical messages 37