![](/images/backgrounds/286708/hp-lj-1100-users-manual-549199121x1.png)
NVRAM PJL factory variables
To use the following commands, you need some method to send PJL commands to the printer, either with a software tool or by copying a binary file that contains the commands from the host using an
copy /b filename lpt1 |
|
Here is an example of a file that uses one of the commands: |
|
2 |
@PJL ‘command’
@PJL RESET
Here is an example of using the NVRAMINIT command:
@PJL RESET
Note
Set SERVICEMODE before trying to set the variable or you will not get the desired result. Also, reset the PJL to be sure that the SERVICEMODE status is cleared.
To create these files, you need an editor that can insert the ESC character or is able to copy it in from an existing file. If a software tool is used, simply send the same strings in the same order as given for the example files.
EN | LJ 3200 Service mode functions 119 |