Tray 1 load [type] [size] (continued)

4To print on a different media that is already loaded:

•Press GO to print from the next available tray.

•Press -VALUE+to scroll through the available types and sizes.

•Press SELECT to accept the alternate type or size.

•Inspect the switches in the tray.

•Remove the tray, and then turn the printer on. Push the switches by hand to see if the switches register.

Tray 1 size = [xxxx]

Choose one of the following:

•Press SELECT to accept the media size.

•Press -VALUE+to change the size, and then press SELECT to accept the new size.

Tray 1 type = [xxxx]

Choose one of the following:

•Press SELECT to accept the media type.

•Press -VALUE+to change the type, and then press SELECT to select the new type.

Unable to mopy job

Memory of file system failures would not allow a mopy job to occur.

1Reseat the RAM DIMMs or the EIO hard disk.

2Install additional memory or an EIO hard disk.

64 Chapter 1 – Control-panel messages

EN