Fatal error secondary messages (continued)

Message

Cause

Solution

 

Scan buffer error.

1. Unplug the printer,

 

 

remove and reattach the

 

 

optional copier/scanner,

 

 

and then plug the printer

 

 

back in.

 

 

2. Replace the optional

 

 

copier/scanner.

 

Miscellaneous interface

1. Unplug the printer,

 

error.

remove and reattach the

 

 

optional copier/scanner,

 

 

and then plug the printer

 

 

back in.

 

 

2. Replace the optional

 

 

copier/scanner.

 

General fatal error.

1. Unplug the printer and

 

 

plug it back in.

 

 

2. Disconnect the I/O cable

 

 

and print a self-test page. If

 

 

the self-test is successful,

 

 

reconnect the I/O cable.

 

 

3. If the error persists,

 

 

replace the formatter PCA.

14 Chapter 1 – Control-panel messages

EN