LJ 4100 series (continued)
Using the auto-cleaning page
The auto-cleaning page feature helps keep the fuser rollers clean, which maintains excellent output quality. The auto-cleaning page feature is accessible through the control panel and is supported through Web JetAdmin, as well. Once set up, the printer runs a cleaning page through the printer as a separate job at the frequency requested with no further user intervention. The settings can be changed or the feature can be turned off at any time.
Note
When the auto-cleaning page feature is enabled, the printer automatically pulls plain letter- or A4-sized media from a tray. If the media size or types are not available in the printer, a message appears in the control-panel display requesting the user to load paper into the printer.
To override a paper-load message, press Go, and then answer the questions on the control panel display.
To set up the auto-cleaning page:
1Press Menu until PRINT QUALITY MENU appears.
2Press Item until AUTO CLEANING PAGE appears.
3Press Value+ until =On appears, and then press Select.
4Press Value+ to select the auto cleaning frequency, and then press Select.
5Press Item until CLEANING PAGE SIZE=LETTER or A4, and then press Value+ to select the media size to be used for cleaning.
6Press Select to save the auto-cleaning settings.
The auto cleaning page takes about 2.5 minutes to process and will only occur between job boundaries when the printer is idle.
242 Chapter 9 – Image quality | EN |