TO SET A CLEAN CYCLE
The
TO STOP A CLEAN CYCLE:
1.Press the OVEN/OFF button.
2.Wait until the oven has cooled below locking
temperature
3.Slide the door lock handle left to unlock the door. If the door lock handle does not move easily, wait a few more minutes, then try again. You will not be able to unlock the oven unless the oven tempera- ture is below 45OOF. Never force the door lock handle.
To
1.Slide the door lock handle to the right. You may need to press the door slightly to get it to lock pro- perly.
Never try to force the door lock handle. Forcing the handle may damage the door locking mechanism.
2.Push CLEAN button.
You can find out when the clean cycle will be finished by pushing the STOP TIME button.
To use delayed
1.Push STOP TIME button.
2.Turn SET knob to time of day when you wish clean- ing to be completed (must be more then 3% hours later than current time of day).
3.Slide the door lock handle to the right. You may need to press the door slightly to get it to lock pro- perly. Never try to force the door lock handle. Forc- ing the handle may damage the door locking mechanism.
4.Push CLEAN button.
WHEN A CLEAN CYCLE IS FINISHED.
1.Wait until the oven has cooled below locking
temperature
2.Slide the door lock/handle left to unlock the door. If the door lock handle does not move easily, wait a few more minutes, then try again. You will not be
able to unlock the oven unless the oven
temperature is at a safe level. Never force the door lock handle.
AFTER A CLEAN CYCLE
After a clean cycle, you may notice some white ash in the oven. Just wipe it up with a damp cloth.
If white spots remain, remove them with a
If the oven is not clean after one clean cycle, the cycle may be repeated.
27