REMOVABLE OVEN DOOR
To remove:
1.Open the door to the stop position (see illustration).
2.Grasp the door at each side and lift up and off the hinges.
See the cleaning chart on page 25.
NOTE: When the door is removed and hinge arms are at stop position, do not bump or try to move the hinge
arms. The | hinges could snap | back causing an injury to | |||||||
the hands | or | damage to the porcelain | on the front | of the | |||||
range. | Cover | the | hinges | with |
| toweling | or empty | towel | |
.. | . .. |
| __ | . | oven | area. |
|
| |
rorls | while | working | in the |
|
| ||||
STOP POSITION
To replace:
1.Hold the door over the hinges with the slots at the bottom edge of the door lined up with the hinges. The hinge arms must still be in the stop position.
2.Slide the door down onto the hinges as far as it will go and close the door.
REMOVABLE OVEN RACKS
Be careful not to scratch the oven finish when installing or removing oven racks.
BUMP IN
RACK GUIDE
To install:
1.Set the raised back edge of the rack on a pair of rack guides.
2.Push the rack in until you reach the bump in the rack guide, then lift the front of the rack a bit and push the rack all the way in.
To remove:
1.Pull the oven rack out, then up, in one motion. See the cleaning chart on page 25.
28
