54 Printer error
1 | Disconnect the power cable from the product, wait at least 30 | 1 |
| seconds, reconnect the power cable, and then wait for the product | |
| to initialize. |
|
2 | If the error persists, replace the formatter. |
|
54.1 Remove sealing tape alternates with From toner cartridge
1Open the top cover, and remove the toner cartridge.
2Pull the sealing tape tab to remove the strip.
3Reinstall the toner cartridge, and then close the top cover.
54.4Printer error alternates with
Cycle power to continue
1Remove the printer from any UPS supplies, additional power supplies, or power strips.
2Plug the printer into a wall outlet, and see if this resolves the problem.
3If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used.
4The line voltage and current source at the printer location might need to be inspected to ensure that it meets the printer’s electrical specifications.
55 DC controller error
1Disconnect the power cable from the product, wait at least 30 seconds, reconnect the power cable, and then wait for the product to initialize.
2Check the cabling to the ECU.
3If the error persists, replace the ECU.
EN | Numerical messages 77 |